Alloy Axle Packages Are Optimized For Street & Track Use
See our Hy-Tuf axles for maximum torsional strength for all out Drag Racing
Alloy Axle Splines
Chevy 8.2 10 bolt – 28
Chevy 8.5 10 bolt – 28 / 30
Chevy 12 bolt car – 30 / 35 *
Dana 60 – 35 *
Ford 8.8 – 28 / 31 / 35 *
Ford 9″ – 28 / 31 / 35 *
Mopar 8 3/4 – 30 / 35 *
57-64 Olds/Pontiac – 35 *
* 35 spline Alloy packages – P350258 / P350458
All Chevy & Ford 8.8 Applications Require Replacement 3.150″ Housing Ends
Packages with C-clip Eliminator kit for OEM housing ends are shown near the bottom
Alloy Axles
• Forged from modified 1550 premium steel
• Majority of machining performed before heat treat to provide consistent hardness
• Induction hardened to Rc 58-62 to increase torsional strength while remaining ductile
• Finish machined after heat treat to ensure accuracy
• Choice of 28 up to 31 spline
• Lengths up to 34 1/2″
• Choice of bolt circle
• Forged in the USA
• Designed and machined by Strange Engineering
Choice of Axle Bearings Might Be Limited To Housing End Type
Mopar 2.875″ I.D. & Small Ford housing ends can only use sealed ball bearings
Timken® Tapered Unit Bearings – A1013
• Designed for use with 3.150″ housing end
• Best for side loading and high mileage
• Includes outer seals and locking collars
Sealed Ball Bearings – A1021 / A1023 * / A1022 * / A1022OB *
• Low friction bearing
• Life reduced during prolonged use
• O.D. grooved for o-ring to eliminate inner axle seal
• Includes o-rings and locking collars
* These bearings include retainer plates
Retainer Plates – A1016 / A1018 / A1114 / H1147B
• For A1013 or A1021 bearings
• New plates ensure proper axle retention
Choice Of 5/8″-18 Stud Kit
Bolt Style – A1027 / A1027L / A1027S
• 5/8″-18 x 3″ Grade 8 fully threaded bolts
• Length is measured from underneath the hex of the stud
• Thin .200″ hex head provides additional clearance
• Width choice of anti-marring/spacer washers
• Includes threaded sleeves, installation tool & flanged lug nuts
Shank Style – A1036 / A1037 / A1037MD / A1038 / A1039 / A1041
• 5/8″-18 chrome moly stud available in six different shank lengths
• Width choice of anti-marring/spacer washers
• Includes thin head self locking inner nuts & flanged lug nuts
Options
Install axle bearings – A1008R
Access hole or extra bolt circle – A1004
Other 28-31 Spline Alloy Axle Packages
With spool – P310458S
Street / Track Axle Packages With C-Clip Eliminator Kit
OEM Chevy 8.2 car in 28 spline – P1011GOT58
OEM Chevy 8.5 car in 28 or 30 spline – P1011GOT58
OEM Chevy 12 bolt car in 30, 33, or 35 spline – P1011GOT58
OEM Mustang 8.8 in 28 or 31 spline – P3109F8658 / P3109F9458 / P3109F0558
OEM Mustang 8.8 in 35 spline – P3509F8658 / P3509F9458 / P3509F0558
Pro Race Axle Package
With bearings, retainer plates & studs – P100858
